More On The System Halted
The computer is a wonderful device
so long as it works properly and when errors surface
they are enough to make you frustrated and annoyed.
One of the main computer errors that you may face on
your computer is the system halted
error. This error is one that can arise due to a number
of reasons and when it occurs, you should not panic
and try to rectify the error yourself.
When you are faced with the system halted
error you should press F1 to resume. There are reasons
for the system to be halted and one of the prime ones
could be the failure of the drive to set up the utility.
In addition to this you will also have to see whether
you do not have incorrect disk parameters as this often
gives rise to the system halted error
on your computer. With the aid of the floppy disk you
have the option to reset the disk parameter in order
to eradicate the error in the system.
You can also get the system halted
error due to broken programs in the affected system.
There also can be a possibility where some parts of
the disk partition have been tampered with and this
in turn leads to the error. You can perform the order
– f disk/ mbr with the aid of a floppy disk to rectify
the system halted error with the aid of the leading
program. This is the best way to solve the problem and
bring back the computer to its normal functioning. The
f disk is one that contains the main code of the leading
program that you are using and with the aid of the above
step you are able to rectify the problem positively
in the hard disk and eradicate the system halted
error that takes place.