for Ms Error Codes
As the topic is about ms error
codes, so let us check with the system device
manager. It is because; most of the system errors start
from here. For that first we need to click on “Start”
menu and then on “Settings”. The “Control Panel” windows
will open and we need to double-click on “System”. Then
we need to click on the Device Manager tab. From there
again we need to double-click a device type. After this
we need to double-click a device to view its properties.
If any ms error codes are coming up,
it will appear in the device status box under the General
Generally, ms error codes appear with
a number. For example, “code 1” which means device is
not configured correctly. The solution would be updating
the device driver or we can try running the Add New
Hardware wizard from the control panel. If the system
is showing “code 6” than it means another device is
using the same driver. We can fix this, by shutting
down the computer. It means that there is a conflict
between two devices. Another example could be “Code
8” which happens if several different error messages
come up for a single issue. It means that the device
loader for a device could not be found by the computer.
We can try to fix these ms error codes
by running windows setup by using the windows CD.
Moreover, “Code 9” can also be considered among ms
error codes. It simply means that the information
for a particular device in the system registry is invalid
or corrupted. So, we can say that every ms error
codes has solution hidden within it. All we
need to do is to check the error and work on that respectively.