Break Out From Error Code 12
Error code 12 usually
takes place in the printers. It happens when we take
out print-outs. However, these codes may differ from
various manufacturers like HP, Canon, and Lexmark etc.
If we understand these error codes then we can get a
break though from error code 12. Modern
printers have the LCD screen to display any error but
it may come up on the system screen as well. We should
not fright about it but need to narrow on the issue
and try to resolve it cautiously. However, each code
has a different logic but it is not unworkable to be
aware of it.
All of a sudden if the error code 12
appears, that means the printer attached with the computer
is opened. So, first we need to ensure whether the cartridge
is correctly installed or not. Then we need to check
the cover of the printer. After this we need to take
a printout out of a test page. If everything looks fine,
we can go ahead and continue with the printing. However,
if there page is trapped in the printer. The same issue
may happen. Then we need to open the cover of the printer
and try to remove the paper manually or else we need
to take some actions with the help of the printer software.
If nothing helps than we would come across with error
code 12 and we may need to substitute the rollers
However, if we see any error regarding illogical manual
supply, we may consider it as an error code
12. This happens when we don’t put the paper
accurately into the printer. We should always keep papers
while taking the print-outs. By simply following this
basic stuff, we can make printer up and running.