Remove the Error Code 0x80004005
If we are talking about the error
code 0x80004005, we have to discuss about windows
operating system. Actually every operating system comes
up with “EULA”. Every user has to accept this before
installing the operating system. In simple words, computer
will not boot with this acceptance. However, recovering
the operating system would help to defend the error
code 0x80004005. Data saved on the hard drive
will be retrieved but it may not run after the fresh
Moreover, people who have tried to upgrade the operating
system, they have to suffer for the error code
0x80004005. The best way is to start “in-place
upgrade” repair of the upgraded operating system with
the help of the installation CD. Unfortunately, if that
dosen’t helps, it is suggested to go back to the old
operating system. But, if we still want to stay with
the upgraded system, we need to run the installation
CD and need to look for”C:\WINDOWS\System32”. Then we
need to type the file extensions like Wpa.dbl, Actshell.htm,
Pidgen.dll, Wpabaln.exe, Licdll.dll, Regwizc.dll and
Licwmi.dll under the RENFile_Name.extensionFile_Name.old.
We need to follow the same sequence; otherwise error
code 0x80004005 cannot be removed. After this
we need to access the CD drive.
If this look complicated then we can choose another
alternative for error code 0x80004005.
For that, we need to open the "My Computer"
icon with the help of a right-click. From the "Properties”
option, we need to select the "System Restore"
tab. There we need to click on the "Turn off System
Restore on All Drives" box and then"OK".
Now we need to re-boot the computer. Again we need to
right-click on the "My Computer" and then
"Properties". We will choose the "System
Restore". The error code 0x80004005
troubleshooting should be over by this time.