More On The CMOS Checksum Error Defaults Loaded
There are a host of computer errors
that strike the user at all time. One of these errors
is the cmos checksum error defaults loaded
error that may instill fear in the person once it occurs.
There is no reason to panic as this error can be solved
effectively and that too without hassles.
Before we understand the cmos checksum error
defaults loaded issue we should know what the
cmos checksum implies and how it affects our computer.
Known as a code that detects computer errors the main
task of the checksum is to safeguard the settings of
the BIOS that is stored in CMOS memory of the computer.
Whenever the computer is booted you will find that the
number is recomputed and it is always checked against
the value that is stored in the computer. If there is
a mismatch between the two values you will find that
the computer will generate an error message that indicates
that the contents of the CMOS memory is wrong. The error
message that you will find will indicate how your computer
is reacting to it.
When it comes to the cmos checksum error defaults
loaded error message this indicates that the
BIOS has become corrupted. When this error occurs you
can upgrade the BIOS of the motherboard that can be
effectively downloaded from the manufacturer of your
motherboard’s website. The cmos checksum error
defaults loaded error message may also arise
when you may have in the recent past attached new hardware
to your computer system where the BIOS could not have
been detected correctly. The solution to this is that
you will have to enter manually the set up of the BIOS
and alter the device. This can be done by reinserting
the battery and switch the jumper to the 1-2 pins. You
have to plug and connect the power cord and boot your
system to rectify the cmos checksum error defaults
loaded in this manner.